![]() ![]() ![]() ![]() | Create! Forget? | |
![]() |
![]() | Board Meeting - 6:00PM Closed Board Meeting |
When: Session was already held. Cost: $1,000,000 non-members (members: $-4) (Nothing to take home) Length: 2hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. | |
![]() | Beginner Wheel Throwing Pottery: 6-Week Course Class - 6:30PM Beginner Wheel Throwing Pottery: 6-Week Course Join us for a 6-class series guiding you through the full process of making clay pots—from throwing on the wheel to glazing. Classes meet Tuesday nights on the following dates: May 6, 13, 20, 27 · June 3, 17 (No class June 10) The first 5 weeks we will primarily work on the wheels. The final week will focus on glazing your work. All materials (clay, glaze, and kiln firing) are included. Class will be canceled if fewer than 3 participants are registered by May 5, 2025, at 6:00 PM. |
Instructor: Brian![]() | When: In 11 hours - Tuesday May 6th, 2025 6:30PM - 9:00PM Cost: $250 non-members (members: $245)(Take home: Ceramic Pots) Length: 2.5hrs Ages: 18 Max Attendees: 4 Currently:4 Policies: No Refunds. Empty Class cancels 24hrs before start. Last signups taken 24hrs prior to start. LOCKED! No new signups taken this close to class start. |
![]() | In Person - DMS Membership Orientation Class - 6:00PM *This class is only for New Members to orient to Duluth MakerSpace. Attendees will be expected to have a current membership or pay for a months membership at the time of orientation.* If you’re looking for a tour, email Mike - mikeolson@duluthmakerspace.com A general orientation to everything Duluth Makerspace. In this mandatory class for RFID access, we go over important tool usage, as well as workshop expectations and function. If you just can't make this orientation, please email mikeolson@duluthmakerspace.com to set up a time that will work. |
Instructor: Nathan![]() | When: In a day - Wednesday May 7th, 2025 6:00PM - 8:00PM Cost: $20 non-members (members: $15) (Nothing to take home) Length: 2hrs Ages: 18 Max Attendees: 8 Currently:1 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. 7 spots remaining. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
![]() | Fix It Clinic 3:30 - 6:00 pm Event - 3:30PM DMS, in cooperation with WLSSD, Duluth Folk School, Northern Bedrock and a whole bunch of talented volunteers is the site of this months "Fix It Clinic". The clinic runs from 3:30 - 6:00 pm. Makers should schedule their usage around this day as we need time to set up and clean up after. |
Organizer: Mike![]() | When: In 4 days - Saturday May 10th, 2025 3:30PM - 7:00PM Cost: FREE! for anyone. Length: 3.5hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Event. |
![]() | Member Meeting - 6:00PM Monthly Makerspace Member meeting to review current events, functions, and updates for the Duluth Makerspace Community. Scheduled the second Monday of every month(Unless changed due to holidays). Pizza will be provided. |
Organizer: ![]() | When: In 6 days - Monday May 12th, 2025 6:00PM - 7:30PM Cost: FREE! for anyone. Length: 90 minutes Currently:0 Policies: No Refunds. Empty Meeting cancels 24hrs before start. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Meeting. |
PREVIOUS CLASSES REQUIRED Wheel Throwing Class - 6:30PM PREVIOUS WHEEL THROWING CLASS REQUIRED This is the second week of the Beginner Wheel Throwing Pottery: 6-Week Course Join us for a 6-class series guiding you through the full process of making clay pots—from throwing on the wheel to glazing. Classes meet Tuesday nights on the following dates: May 6, 13, 20, 27 · June 3, 17 (No class June 10) The first 5 weeks we will primarily work on the wheels. The final week will focus on glazing your work. All materials (clay, glaze, and kiln firing) are included. Class will be canceled if fewer than 3 participants are registered by May 5, 2025, at 6:00 PM. | |
Instructor: Brian![]() | When: In 7 days - Tuesday May 13th, 2025 6:30PM - 9:00PM Cost: $250 non-members (members: $245)(Take home: Ceramic Pots) Length: 2.5hrs Ages: 18 Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
![]() | Intro to Clay Class - 6:00PM This class will cover the bases needed to get started making pottery. We will talk about the different types of clay, the stages the clay goes through and learn how to make a basic pot through both wheels, throwing and hand building. Students will use various pottery hand tools and the pottery wheel. |
Instructor: Brian![]() | When: In 9 days - Thursday May 15th, 2025 6:00PM - 8:30PM Cost: $45 non-members (members: $40)(Take home: Pottery) Length: 2.5hrs Ages: 15 Max Attendees: 3 Currently:3 Policies: No Refunds. Will not cancel. Last signups taken 48hrs prior to start. No spots left! look for a similar event in future. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
![]() | In Person - DMS Membership Orientation Class - 6:00PM *This class is only for New Members to orient to Duluth MakerSpace. Attendees will be expected to have a current membership or pay for a months membership at the time of orientation.* If you’re looking for a tour, email Mike - mikeolson@duluthmakerspace.com A general orientation to everything Duluth Makerspace. In this mandatory class for RFID access, we go over important tool usage, as well as workshop expectations and function. If you just can't make this orientation, please email mikeolson@duluthmakerspace.com to set up a time that will work. |
Instructor: Ron![]() | When: In 14 days - Tuesday May 20th, 2025 6:00PM - 8:00PM Cost: $20 non-members (members: $15) (Nothing to take home) Length: 2hrs Ages: 18 Max Attendees: 8 Currently:1 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. 7 spots remaining. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
PREVIOUS CLASSES REQUIRED Wheel Throwing Class - 6:30PM PREVIOUS WHEEL THROWING CLASS REQUIRED This is the third week of the Beginner Wheel Throwing Pottery: 6-Week Course Join us for a 6-class series guiding you through the full process of making clay pots—from throwing on the wheel to glazing. Classes meet Tuesday nights on the following dates: May 6, 13, 20, 27 · June 3, 17 (No class June 10) The first 5 weeks we will primarily work on the wheels. The final week will focus on glazing your work. All materials (clay, glaze, and kiln firing) are included. Class will be canceled if fewer than 3 participants are registered by May 5, 2025, at 6:00 PM. | |
Instructor: Brian![]() | When: In 14 days - Tuesday May 20th, 2025 6:30PM - 9:00PM Cost: $250 non-members (members: $245)(Take home: Ceramic Pots) Length: 2.5hrs Ages: 18 Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
Intro to Welding: MIG and Stick Class - 12:00PM Join our Introduction to Welding: MIG & Stick class on May 24-25. Dive into the world of metalwork with a seasoned welder with over a decade of experience. Designed for beginners, this 8-hour, two-day course covers MIG (wire feed) and SMAW (stick) welding techniques, using tools like welders, chop saws, angle grinders, and clamps. You’ll learn essential safety practices and get hands-on practice. No prior experience is needed—just a willingness to learn and create! The class will run from 12-4PM on both Saturday and Sunday. | |
When: In 18 days - Saturday May 24th, 2025 12:00PM - 8:00PM Cost: $200 non-members (members: $195)(Take home: None) Length: 8hrs Ages: 18 Max Attendees: 4 Currently:1 Policies: No Refunds. Empty Class cancels 24hrs before start. Last signups taken 24hrs prior to start. 3 spots remaining. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. | |
Introduction to Fusion 360 Class - 6:00PM In this hands-on class, you’ll learn the essential skills needed to turn ideas into real 3D designs using Fusion 360—an industry-standard tool used by engineers, product designers, and makers around the world. You’ll explore how to navigate the Fusion 360 interface, create precise 2D sketches with dimensions, and transform them into 3D objects using tools like extrude and revolve. Along the way, you’ll pick up basic design principles and best practices used in professional design and manufacturing. By the end of the session, you’ll complete a simple, personalized project—like a name tag or custom keychain—that combines dimensional sketching, extrusion, and text, and can even be prepared for 3D printing. No experience needed. Laptops are provided, or feel free to bring your own. | |
Instructor: Paul Schonfeld![]() | When: In 23 days - Thursday May 29th, 2025 6:00PM - 8:00PM Cost: $50 non-members (members: $45)(Take home: None) Length: 2hrs Ages: 18 Max Attendees: 6 Currently:0 Policies: No Refunds. Empty Class cancels 24hrs before start. Last signups taken 1hrs prior to start. 6 spots remaining. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
Intro to Woodworking: Cedar Bench Build Class - 6:00PM Join our Intro to Woodworking class running May 31-June 10, 2025, from 6pm-8pm over four sessions! Led by a passionate woodworking hobbyist, this 8-hour course introduces beginners to essential shop tools, including the table saw, band saw, jointer, planer, drill press, and sanders. You’ll learn shop safety and hands-on techniques while crafting a functional, stylish cedar bench to take home. No prior skills are required. Sign up now! Course dates are: Saturday 5/31 6-8pm Tues 6/3 6-8pm Saturday 6/7 6-8pm Tues 6/10 6-8pm | |
Instructor: Jessica Alexander![]() | When: In 25 days - Saturday May 31st, 2025 6:00PM - 2:00AM Cost: $225 non-members (members: $220)(Take home: Cedar Bench) Length: 8hrs Ages: 18 Max Attendees: 4 Currently:1 Policies: No Refunds. Empty Class cancels 24hrs before start. Last signups taken 24hrs prior to start. 3 spots remaining. Login at top, or add a Free Account to pay for Class online or stop in shop during staffed hours to pay. |
![]() | Board Meeting - 6:00PM Closed Board Meeting |
When: In 27 days - Monday June 2nd, 2025 6:00PM - 8:00PM Cost: $1,000,000 non-members (members: $-4) (Nothing to take home) Length: 2hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to pay for Meeting online or stop in shop during staffed hours to pay. | |
![]() | Member Meeting - 6:00PM Monthly Makerspace Member meeting to review current events, functions, and updates for the Duluth Makerspace Community. Scheduled the second Monday of every month(Unless changed due to holidays). Pizza will be provided. |
Organizer: ![]() | When: In 34 days - Monday June 9th, 2025 6:00PM - 7:30PM Cost: FREE! for anyone. Length: 90 minutes Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Meeting. |
![]() | Board Meeting - 6:00PM Closed Board Meeting |
When: In 62 days - Monday July 7th, 2025 6:00PM - 8:00PM Cost: $1,000,000 non-members (members: $-4) (Nothing to take home) Length: 2hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to pay for Meeting online or stop in shop during staffed hours to pay. | |
![]() | Member Meeting - 6:00PM Monthly Makerspace Member meeting to review current events, functions, and updates for the Duluth Makerspace Community. Scheduled the second Monday of every month(Unless changed due to holidays). Pizza will be provided. |
Organizer: ![]() | When: In 69 days - Monday July 14th, 2025 6:00PM - 7:30PM Cost: FREE! for anyone. Length: 90 minutes Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Meeting. |
![]() | Gitchee Gumee Agate Festival Day 1 Event - 4:00PM At Ursa Minor Brewing, Friday August 01, 4:00-8:00 PM Agate Show and Tell, Vendor Meet and Greet Stump the geologist Agate Hunter t-shirt release |
When: In 87 days - Friday August 1st, 2025 4:00PM - 9:00PM Cost: $0 non-members (members: $-5)(Take home: Agates? Rocks? Joy?) Length: 5hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Event. | |
![]() | Gitchee Gumee Agate Festival Day 2 Event - 10:00AM STAY TUNED: More information to follow. Ursa Minor Brewing 10:00-5:00pm –Vendor booths including Agates, Gems, Minerals and Rock related art –DMS Fundraiser –Delicious Food –Kids agate dig -Live music throughout the day |
When: In 88 days - Saturday August 2nd, 2025 10:00AM - 5:00PM Cost: $0 non-members (members: $-5)(Take home: Agates, rocks, treasures, joy) Length: 7hrs Currently:0 Policies: No Refunds. Will not cancel. Last minute signups/walkins allowed space permitting. Login at top, or add a Free Account to mark as attending this free Event. | |
Wanted Donate Suppliers Learn | ![]() |
About Us Credits Press Sponsors |
Copyright © 2025 Duluth MakerSpace, LLC or respective member. |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |